Engineered human osteoarthritic cartilage organoids.

The availability of human cell-based models capturing molecular processes of cartilage degeneration can facilitate development of disease-modifying therapies for osteoarthritis [1], a currently unmet clinical need. Here, by imposing specific inflammatory challenges upon mesenchymal stromal cells at a defined stage of chondrogenesis, we engineered a human organotypic model which recapitulates main OA pathological traits such as chondrocyte hypertrophy, cartilage matrix mineralization, enhanced catabolism and mechanical stiffening. To exemplify the utility of the model, we exposed the engineered OA cartilage organoids to factors known to attenuate pathological features, including IL-1Ra, and carried out mass spectrometry-based proteomics. We identified that IL-1Ra strongly reduced production of the transcription factor CCAAT/enhancer-binding protein beta [2] and demonstrated that inhibition of the C/EBPß-activating kinases could revert the degradative processes. Human OA cartilage organoids thus represent a relevant tool towards the discovery of new molecular drivers of cartilage degeneration and the assessment of therapeutics targeting associated pathways.

The prognostic impact of non-driver gene mutations and variant allele frequency in primary myelofibrosis.

Prognostic impact of non-MPN driver gene mutations in primary myelofibrosis. MIPSS70: Mutation-Enhanced International Prognostic Score System.

A perfusion-based three-dimensional cell culture system to model alveolar rhabdomyosarcoma pathological features.

Although a rare disease, rhabdomyosarcoma (RMS) is one of the most common cancers in children the more aggressive and metastatic subtype is the alveolar RMS (ARMS). Survival outcomes with metastatic disease remain dismal and the need for new models that recapitulate key pathological features, including cell-extracellular matrix (ECM) interactions, is warranted. Here, we report an organotypic model that captures cellular and molecular determinants of invasive ARMS. We cultured the ARMS cell line RH30 on a collagen sponge in a perfusion-based bioreactor (U-CUP), obtaining after 7 days a 3D construct with homogeneous cell distribution. Compared to static culture, perfusion flow induced higher cell proliferation rates (20% vs. 5%), enhanced secretion of active MMP-2, and upregulation of the Rho pathway, associated with cancer cell dissemination. Consistently, the ECM genes LAMA1 and LAMA2, the antiapoptotic gene HSP90, identified in patient databases as hallmarks of invasive ARMS, were higher under perfusion flow at mRNA and protein level. Our advanced ARMS organotypic model mimics (1) the interactions cells-ECM, (2) the cell growth maintenance, and (3) the expression of proteins that characterize tumor expansion and aggressiveness. In the future, the perfusion-based model could be used with primary patient-derived cell subtypes to create a personalized ARMS chemotherapy screening system.

Failure of cartilage regeneration: emerging hypotheses and related therapeutic strategies.

Osteoarthritis (OA) is a disabling condition that affects billions of people worldwide and places a considerable burden on patients and on society owing to its prevalence and economic cost. As cartilage injuries are generally associated with the progressive onset of OA, robustly effective approaches for cartilage regeneration are necessary. Despite extensive research, technical development and clinical experimentation, no current surgery-based, material-based, cell-based or drug-based treatment can reliably restore the structure and function of hyaline cartilage. This paucity of effective treatment is partly caused by a lack of fundamental understanding of why articular cartilage fails to spontaneously regenerate. Thus, research studies that investigate the mechanisms behind the cartilage regeneration processes and the failure of these processes are critical to instruct decisions about patient treatment or to support the development of next-generation therapies for cartilage repair and OA prevention. This Review provides a synoptic and structured analysis of the current hypotheses about failure in cartilage regeneration, and the accompanying therapeutic strategies to overcome these hurdles, including some current or potential approaches to OA therapy.

An International Society for Cell and Gene Therapy Mesenchymal Stromal Cells (MSC) Committee perspectives on International Standards Organization/Technical Committee 276 Biobanking Standards for bone marrow-MSCs and umbilical cord tissue-derived MSCs for research purposes.

The rapidly growing field of mesenchymal stromal cell (MSC) basic and translational research requires standardization of terminology and functional characterization. The International Standards Organization's (ISO) Technical Committee (TC) on Biotechnology, working with extensive input from the International Society for Cells and Gene Therapy (ISCT), has recently published ISO standardization documents that are focused on biobanking of MSCs from two tissue sources, Wharton's Jelly, MSC(WJ) and Bone Marrow, MSC(M)), for research and development purposes and development. This manuscript explains the path towards the consensus on the following two documents: the Technical Standard ISO/TS 22859 for MSC(WJ) and the full ISO Standard 24651 for MSC(M) biobanking. The ISO standardization documents are aligned with ISCT's MSC committee position and recommendations on nomenclature because there was active input and incorporation of ISCT MSC committee recommendations in the development of these standards. The ISO standardization documents contain both requirements and recommendations for functional characterization of MSC(WJ) and MSC(M) using a matrix of assays. Importantly, the ISO standardization documents have a carefully defined scope and are meant for research use of culture expanded MSC(WJ) and MSC(M). The ISO standardization documents can be updated in a revision process and will be systematically reviewed after 3-5 years as scientific insights grow. They represent international consensus on MSC identity, definition, and characterization; are rigorous in detailing multivariate characterization of MSCs and represent an evolving-but-important first step in standardization of MSC biobanking and characterization for research use and development.

Good Manufacturing Practice-compliant change of raw material in the manufacturing process of a clinically used advanced therapy medicinal product-a comparability study.

The development of medicinal products often continues throughout the different phases of a clinical study and may require challenging changes in raw and starting materials at later stages. Comparability between the product properties pre- and post-change thus needs to be ensured. Here, we describe and validate the regulatory compliant change of a raw material using the example of a nasal chondrocyte tissue-engineered cartilage (N-TEC) product, initially developed for treatment of confined knee cartilage lesions. Scaling up the size of N-TEC as required for the treatment of larger osteoarthritis defects required the substitution of autologous serum with a clinical-grade human platelet lysate (hPL) to achieve greater cell numbers necessary for the manufacturing of larger size grafts. A risk-based approach was performed to fulfill regulatory requirements and demonstrate comparability of the products manufactured with the standard process (autologous serum) already applied in clinical indications and the modified process (hPL). Critical attributes with regard to quality, purity, efficacy, safety and stability of the product as well as associated test methods and acceptance criteria were defined. Results showed that hPL added during the expansion phase of nasal chondrocytes enhances proliferation rate, population doublings and cell numbers at passage 2 without promoting the overgrowth of potentially contaminant perichondrial cells. N-TEC generated with the modified versus standard process contained similar content of DNA and cartilaginous matrix proteins with even greater expression levels of chondrogenic genes. The increased risk for tumorigenicity potentially associated with the use of hPL was assessed through karyotyping of chondrocytes at passage 4, revealing no chromosomal changes. Moreover, the shelf-life of N-TEC established for the standard process could be confirmed with the modified process. In conclusion, we demonstrated the introduction of hPL in the manufacturing process of a tissue engineered product, already used in a late-stage clinical trial. Based on this study, the national competent authorities in Switzerland and Germany accepted the modified process which is now applied for ongoing clinical tests of N-TEC. The described activities can thus be taken as a paradigm for successful and regulatory compliant demonstration of comparability in advanced therapy medicinal products manufacturing.

Effects of the Replacement of Pork Backfat with High Oleic Sunflower Oil on the Quality of the "Chorizo Zamorano" Dry Fermented Sausage.

The "Chorizo Zamorano" dry fermented sausage is a traditional Spanish product which is highly appreciated by consumers. This paper studies the reformulation of this product in order to improve its lipid composition and its fatty acid profile and to reduce its fat content. To achieve this, the fat used in the production of the product was partially replaced with high oleic sunflower oil in proportions of 12.5%, 20%, and 50% of the total fat content. Proximate analysis, fatty acid profiles, lipid oxidation, and sensory analysis were studied. The replacement of fat with oil showed a significant effect on the evolution of the parameters analyzed during ripening in all cases. The batches with sunflower oil presented higher levels of monounsaturated fatty acids (MUFA) and lower levels of saturated fatty acids (SFA) and a similar amount of polyunsaturated fatty acids (PUFA) to the control products. The replacement of up to 20% of oil showed no significant differences for most of the physicochemical and sensory parameters analyzed at the end of the ripening.

Impact of molecular profiling on the management of patients with myelofibrosis.

Myelofibrosis (MF) is a chronic myeloproliferative neoplasm (MPN) characterized by a highly heterogeneous clinical course, which can be complicated by severe constitutional symptoms, massive splenomegaly, progressive bone marrow failure, cardiovascular events, and development of acute leukemia. Constitutive signaling through the JAK-STAT pathway plays a fundamental role in its pathogenesis, generally due to activating mutations of JAK2, CALR and MPL genes (i.e., the MPN driver mutations), present in most MF patients. Next Generation Sequencing (NGS) panel testing has shown that additional somatic mutations can already be detected at the time of diagnosis in more than half of patients, and that they accumulate along the disease course. These mutations, mostly affecting epigenetic modifiers or spliceosome components, may cooperate with MPN drivers to favor clonal dominance or influence the clinical phenotype, and some, such as high molecular risk mutations, correlate with a more aggressive clinical course with poor treatment response. The current main role of molecular profiling in clinical practice is prognostication, principally for selecting high-risk patients who may be candidates for transplantation, the only curative treatment for MF to date. To this end, contemporary prognostic models incorporating molecular data are useful tools to discriminate different risk categories. Aside from certain clinical situations, decisions regarding medical treatment are not based on patient molecular profiling, yet this approach may become more relevant in novel treatment strategies, such as the use of vaccines against the mutant forms of JAK2 or CALR, or drugs directed against actionable molecular targets.

Mec-Positive Staphylococcus Healthcare-Associated Infections Presenting High Transmission Risks for Antimicrobial-Resistant Strains in an Equine Hospital.

Healthcare-associated infections caused by Staphylococcus, particularly Staphylococcus aureus, represent a high risk for human and animal health. Staphylococcus can be easily transmitted through direct contact with individual carriers or fomites, such as medical and non-medical equipment. The risk increases if S. aureus strains carry antibiotic resistance genes and show a phenotypic multidrug resistance behavior. The aim of the study was to identify and characterize methicillin resistant coagulase-positive staphylococci (MRSA) and coagulase-negative staphylococci (MRCoNS) in equine patients and environmental sources in an equine hospital to evaluate the genetic presence of multidrug resistance and to understand the dissemination risks within the hospital setting. We explored 978 samples for MRSA and MRCoNS using Oxacillin Screen Agar in an equine hospital for racehorses in Chile, which included monthly samples (n = 61-70) from equine patients (246) and hospital environments (732) in a one-year period. All isolates were PCR-assessed for the presence of methicillin resistance gene mecA and/or mecC. Additionally, we explored the epidemiological relatedness by Pulsed Field Gel Electrophoresis (PFGE) in MRSA isolates. Phenotypic antibiotic resistance was evaluated using the Kirby-Bauer disk diffusion method. We estimated the unadjusted and adjusted risk of acquiring drug-resistant Staphylococcus strains by employing logistic regression analyses. We identified 16 MRSA isolates and 36 MRCoNS isolates. For MRSA, we detected mecA and mecC in 100% and 87.5 % of the isolates, respectively. For MRCoNS, mecA was detected among 94% of the isolates and mecC among 86%. MRSA and MRCoNS were isolated from eight and 13 equine patients, respectively, either from colonized areas or compromised wounds. MRSA strains showed six different pulse types (i.e., A1-A3, B1-B2, C) isolated from different highly transited areas of the hospital, suggesting potential transmission risks for other patients and hospital staff. The risk of acquiring drug-resistant Staphylococcus species is considerably greater for patients from the surgery, equipment, and exterior areas posing higher transmission risks. Tackling antimicrobial resistance (AMR) using a One Health perspective should be advocated, including a wider control over antimicrobial consumption and reducing the exposure to AMR reservoirs in animals, to avoid cross-transmission of AMR Staphylococcus within equine hospitals.

Repair of a Rat Mandibular Bone Defect by Hypertrophic Cartilage Grafts Engineered From Human Fractionated Adipose Tissue.

Background: Devitalized bone matrix (DBM) is currently the gold standard alternative to autologous bone grafting in maxillofacial surgery. However, it fully relies on its osteoconductive properties and therefore requires defects with healthy bone surrounding. Fractionated human adipose tissue, when differentiated into hypertrophic cartilage in vitro, was proven reproducibly osteogenic in vivo, by recapitulating endochondral ossification (ECO). Both types of bone substitutes were thus compared in an orthotopic, preclinical mandibular defect model in rat. Methods: Human adipose tissue samples were collected and cultured in vitro to generate disks of hypertrophic cartilage. After hypertrophic induction, eight samples from two donors were implanted into a mandible defect in rats, in parallel to Bio-Oss® DBM granules. After 12 weeks, the mandible samples were harvested and evaluated by Micro-CT and histology. Results: Micro-CT demonstrated reproducible ECO and complete restoration of the mandibular geometry with adipose-based disks, with continuous bone inside and around the defect, part of which was of human (donor) origin. In the Bio-Oss® group, instead, osteoconduction from the border of the defect was observed but no direct connection of the granules with the surrounding bone was evidenced. Adipose-based grafts generated significantly higher mineralized tissue volume (0.57 ± 0.10 vs. 0.38 ± 0.07, n = 4, p = 0.03) and newly formed bone (18.9 ± 3.4% of surface area with bone tissue vs. 3 ± 0.7%, p < 0.01) than Bio-Oss®. Conclusion: Our results provide a proof-of-concept that adipose-based hypertrophic cartilage grafts outperform clinical standard biomaterials in maxillofacial surgery.

Perfusion-Based Bioreactor Culture and Isothermal Microcalorimetry for Preclinical Drug Testing with the Carbonic Anhydrase Inhibitor SLC-0111 in Patient-Derived Neuroblastoma.

Neuroblastoma is a rare disease. Rare are also the possibilities to test new therapeutic options for neuroblastoma in clinical trials. Despite the constant need to improve therapy and outcomes for patients with advanced neuroblastoma, clinical trials currently only allow for testing few substances in even fewer patients. This increases the need to improve and advance preclinical models for neuroblastoma to preselect favorable candidates for novel therapeutics. Here we propose the use of a new patient-derived 3D slice-culture perfusion-based 3D model in combination with rapid treatment evaluation using isothermal microcalorimetry exemplified with treatment with the novel carbonic anhydrase IX and XII (CAIX/CAXII) inhibitor SLC-0111. Patient samples showed a CAIX expression of 18% and a CAXII expression of 30%. Corresponding with their respective CAIX expression patterns, the viability of SH-EP cells was significantly reduced upon treatment with SLC-0111, while LAN1 cells were not affected. The inhibitory effect on SH-SY5Y cells was dependent on the induction of CAIX expression under hypoxia. These findings corresponded to thermogenesis of the cells. Patient-derived organotypic slice cultures were treated with SLC-0111, which was highly effective despite heterogeneity of CAIX/CAXII expression. Thermogenesis, in congruence with the findings of the histological observations, was significantly reduced in SLC-0111-treated samples. In order to extend the evaluation time, we established a perfusion-based approach for neuroblastoma tissue in a 3D perfusion-based bioreactor system. Using this system, excellent tissue quality with intact tumor cells and stromal structure in neuroblastoma tumors can be maintained for 7 days. The system was successfully used for consecutive drug response monitoring with isothermal microcalorimetry. The described approach for drug testing, relying on an advanced 3D culture system combined with a rapid and highly sensitive metabolic assessment, can facilitate development of personalized treatment strategies for neuroblastoma.

Genipin-crosslinked collagen scaffolds inducing chondrogenesis: a mechanical and biological characterization.

Articular cartilage degeneration is still an unsolved issue owing to its weak repairing capabilities, which usually result in fibrocartilage tissue formation. This fibrous tissue lacks of structural and bio-mechanical properties, degrading over time. Currently, arthroscopic techniques and autologous transplantation are the most used clinical procedures. However, rather than restoring cartilage integrity, these methods only postpone further cartilage deterioration. Therefore, tissue engineering strategies aimed at selecting scaffolds that remarkably support the chondrogenic differentiation of human mesenchymal stem cells (hMSCs) could represent a promising solution, but they are still challenging for researchers. In this study, the influence of two different genipin (Gp) crosslinking routes on collagen (Coll)-based scaffolds in terms of hMSCs chondrogenic differentiation and biomechanical performances was investigated. Three-dimensional (3D) porous Coll scaffolds were fabricated by freeze-drying techniques and were crosslinked with Gp following a "two-step" and an in "bulk" procedure, in order to increase the physico-mechanical stability of the structure. Chondrogenic differentiation efficacy of hMSCs and biomechanical behavior under compression forces through unconfined stress-strain tests were assessed. Coll/Gp scaffolds revealed an isotropic and highly homogeneous pore distribution along with an increase in the stiffness, also supported by the increase in the Coll denaturation temperature (Td  = 57-63°C) and a significant amount of Coll and GAG deposition during the 3 weeks of chondrogenic culture. In particular, the presence of Gp in "bulk" led to a more uniform and homogenous chondral-like matrix deposition by hMSCs if compared to the results obtained from the Gp "two-step" functionalization procedure.

T-cadherin Expressing Cells in the Stromal Vascular Fraction of Human Adipose Tissue: Role in Osteogenesis and Angiogenesis.

Cells of the stromal vascular fraction (SVF) of human adipose tissue have the capacity to generate osteogenic grafts with intrinsic vasculogenic properties. However, cultured adipose-derived stromal cells (ASCs), even after minimal monolayer expansion, lose osteogenic capacity in vivo. Communication between endothelial and stromal/mesenchymal cell lineages has been suggested to improve bone formation and vascularization by engineered tissues. Here, we investigated the specific role of a subpopulation of SVF cells positive for T-cadherin (T-cad), a putative endothelial marker. We found that maintenance during monolayer expansion of a T-cad-positive cell population, composed of endothelial lineage cells (ECs), is mandatory to preserve the osteogenic capacity of SVF cells in vivo and strongly supports their vasculogenic properties. Depletion of T-cad-positive cells from the SVF totally impaired bone formation in vivo and strongly reduced vascularization by SVF cells in association with decreased VEGF and Adiponectin expression. The osteogenic potential of T-cad-depleted SVF cells was fully rescued by co-culture with ECs from a human umbilical vein (HUVECs), constitutively expressing T-cad. Ectopic expression of T-cad in ASCs stimulated mineralization in vitro but failed to rescue osteogenic potential in vivo, indicating that the endothelial nature of the T-cad-positive cells is the key factor for induction of osteogenesis in engineered grafts based on SVF cells. This study demonstrates that crosstalk between stromal and T-cad expressing endothelial cells within adipose tissue critically regulates osteogenesis, with VEGF and adiponectin as associated molecular mediators.

Efficacy of bioreactor-activated bone substitute with bone marrow nuclear cells on fusion rate and fusion mass microarchitecture in sheep.

Bioreactors have been used for bone graft engineering in pre-clinical investigations over the past 15 years. The ability of bioreactor-incubated bone marrow nuclear cells (BMNCs) to enhance bone-forming potential varies significantly, and the three-dimensional (3D) distribution of BMNCs within the scaffold is largely unknown. The aims of this study were (1) to investigate the efficacy of a carbonated hydroxyapatite (CHA) with/without BMNCs on spine fusion rate and fusion mass microarchitecture using a highly challenging two-level posterolateral spine fusion without instrumentation; and (2) to evaluate 3D distribution of BMNCs within scaffolds characterized by immunohistochemistry. Fusion rate and fusion mass were quantified by micro-CT, microarchitectural analysis, and histology. While the homogenous 3D distribution of BMNCs was not observed, BMNCs were found to migrate towards a substitute core. In the autograft group, the healing rate was 83.3%, irrespective of the presence of BMNCs. In the CHA group, also 83.3% was fused in the presence of BMNCs, and 66.7% fused without BMNCs. A significant decrease in the fusion mass porosity (p = .001) of the CHA group suggested the deposition of mineralized bone. The autograft group revealed more bone, thicker trabeculae, and better trabecular orientation but less connection compared to the CHA group. Immunohistochemistry confirmed the ability of bioreactors to incubate a large-sized substitute coated with viable BMNCs with the potential for proliferation and differentiation. These findings suggested that a bioreactor-activated substitute is comparable to autograft on spine fusion and that new functional bone regeneration could be achieved by a combination of BMNCs, biomaterials, and bioreactors.

Case Report: Reconstruction of a Large Maxillary Defect With an Engineered, Vascularized, Prefabricated Bone Graft.

The reconstruction of complex midface defects is a challenging clinical scenario considering the high anatomical, functional, and aesthetic requirements. In this study, we proposed a surgical treatment to achieve improved oral rehabilitation and anatomical and functional reconstruction of a complex defect of the maxilla with a vascularized, engineered composite graft. The patient was a 39-year-old female, postoperative after left hemimaxillectomy for ameloblastic carcinoma in 2010 and tumor-free at the 5-year oncological follow-up. The left hemimaxillary defect was restored in a two-step approach. First, a composite graft was ectopically engineered using autologous stromal vascular fraction (SVF) cells seeded on an allogenic devitalized bone matrix. The resulting construct was further loaded with bone morphogenic protein-2 (BMP-2), wrapped within the latissimus dorsi muscle, and pedicled with an arteriovenous (AV) bundle. Subsequently, the prefabricated graft was orthotopically transferred into the defect site and revascularized through microvascular surgical techniques. The prefabricated graft contained vascularized bone tissue embedded within muscular tissue. Despite unexpected resorption, its orthotopic transfer enabled restoration of the orbital floor, separation of the oral and nasal cavities, and midface symmetry and allowed the patient to return to normal diet as well as to restore normal speech and swallowing function. These results remained stable for the entire follow-up period of 2 years. This clinical case demonstrates the safety and the feasibility of composite graft engineering for the treatment of complex maxillary defects. As compared to the current gold standard of autologous tissue transfer, this patient's benefits included decreased donor site morbidity and improved oral rehabilitation. Bone resorption of the construct at the ectopic prefabrication site still needs to be further addressed to preserve the designed graft size and shape.

Engineering of fully humanized and vascularized 3D bone marrow niches sustaining undifferentiated human cord blood hematopoietic stem and progenitor cells.

Hematopoietic stem and progenitor cells (HSPCs) are frequently located around the bone marrow (BM) vasculature. These so-called perivascular niches regulate HSC function both in health and disease, but they have been poorly studied in humans due to the scarcity of models integrating complete human vascular structures. Herein, we propose the stromal vascular fraction (SVF) derived from human adipose tissue as a cell source to vascularize 3D osteoblastic BM niches engineered in perfusion bioreactors. We show that SVF cells form self-assembled capillary structures, composed by endothelial and perivascular cells, that add to the osteogenic matrix secreted by BM mesenchymal stromal cells in these engineered niches. In comparison to avascular osteoblastic niches, vascularized BM niches better maintain immunophenotypically-defined cord blood (CB) HSCs without affecting cell proliferation. In contrast, HSPCs cultured in vascularized BM niches showed increased CFU-granulocyte-erythrocyte-monocyte-megakaryocyte (CFU-GEMM) numbers. The vascularization also contributed to better preserve osteogenic gene expression in the niche, demonstrating that niche vascularization has an influence on both hematopoietic and stromal compartments. In summary, we have engineered a fully humanized and vascularized 3D BM tissue to model native human endosteal perivascular niches and revealed functional implications of this vascularization in sustaining undifferentiated CB HSPCs. This system provides a unique modular platform to explore hemato-vascular interactions in human healthy/pathological hematopoiesis.

Modeling In Vitro Osteoarthritis Phenotypes in a Vascularized Bone Model Based on a Bone-Marrow Derived Mesenchymal Cell Line and Endothelial Cells.

The subchondral bone and its associated vasculature play an important role in the onset of osteoarthritis (OA). Integration of different aspects of the OA environment into multi-cellular and complex human, in vitro models is therefore needed to properly represent the pathology. In this study, we exploited a mesenchymal stromal cell line/endothelial cell co-culture to produce an in vitro human model of vascularized osteogenic tissue. A cocktail of inflammatory cytokines, or conditioned medium from mechanically-induced OA engineered microcartilage, was administered to this vascularized bone model to mimic the inflamed OA environment, hypothesizing that these treatments could induce the onset of specific pathological traits. Exposure to the inflammatory factors led to increased network formation by endothelial cells, reminiscent of the abnormal angiogenesis found in OA subchondral bone, demineralization of the constructs, and increased collagen production, signs of OA related bone sclerosis. Furthermore, inflammation led to augmented expression of osteogenic (alkaline phosphatase (ALP) and osteocalcin (OCN)) and angiogenic (vascular endothelial growth factor (VEGF)) genes. The treatment, with a conditioned medium from the mechanically-induced OA engineered microcartilage, also caused increased demineralization and expression of ALP, OCN, ADAMTS5, and VEGF; however, changes in network formation by endothelial cells were not observed in this second case, suggesting a possible different mechanism of action in inducing OA-like phenotypes. We propose that this vascularized bone model could represent a first step for the in vitro study of bone changes under OA mimicking conditions and possibly serve as a tool in testing anti-OA drugs.

Engineered nasal cartilage for the repair of osteoarthritic knee cartilage defects.

Osteoarthritis (OA) is the most prevalent joint disorder, causing pain and disability predominantly in the aging population but also affecting young individuals. Current treatments are limited to use of anti-inflammatory drugs to alleviate symptoms or degenerated joint replacement by a prosthetic implant at the end stage of the disease. We hypothesized that degenerative cartilage defects can be treated using nasal chondrocyte­based tissue-engineered cartilage (N-TEC). We demonstrate that N-TEC maintained cartilaginous properties when exposed in vitro to inflammatory stimuli found in osteoarthritic joints and favorably altered the inflammatory profile of cells from osteoarthritic joints. These effects were at least partially mediated by down-regulation of the WNT (wingless/integrated) signaling pathway through sFRP1 (secreted frizzled-related protein-1). We further report that N-TEC survive and engraft in vivo in ectopic mouse models reproducing a human osteochondral OA tissue environment, as well as in sheep articular cartilage defects that mimic degenerative settings. Last, we tested the safety of autologous N-TEC for the treatment of osteoarthritic cartilage defects in the knees of two patients with advanced OA (Kellgren and Lawrence grades 3 and 4) who were otherwise considered for unicondylar knee arthroplasty. No adverse reactions were recorded, and patients reported reduced pain as well as improved joint function and life quality 14 months after surgery. Together, our findings indicate that N-TEC can directly contribute to cartilage repair in osteoarthritic joints. A suitably powered clinical trial is now required to assess its efficacy in the treatment of patients with OA.